The new IGNITER ignition blower from Leister has been specially developed for installation into pellet and wood chip boilers. The IGNITER BR4 with 3.4 kW has what it takes. The interface was selected so that the ignition blowers can easily be installed into any heating boiler.
IGNITER BR4
Specially developed for installation in pellet and wood chip heating systems. Up to 3400 W performance.
Technical Data
IGNITER BR4 – 230 V / 3400 W / 50 Hz
| Attribute | Unit | Value |
|---|---|---|
| Voltage | V~ | 230 |
| Frequency | Hz | 50 |
| Power | W | 3400 |
| Min. air volume (20°C) | l/min | 230 |
| Air pressure | kPa | 2.48 |
| Max. air outlet temperature | °C | 600 |
| Noise emission level | dB(A) | 68 |
| Aperture ∅ | mm | 90 |
| Weight | kg | 1.2 |
| Length | mm | 294 |
| Conformity mark |  |
|
| Approval mark |  |
|
| Protection class II |  |
Downloads
General Catalogs :
GC – General Catalog Process Heat (7,95 MB)
Brochures :
BR – Hot-air blowers (1,28 MB)
BR – Process Heat – useful formulas (0,05 MB)
Manuals :
BA – IGNITER (5,15 MB)
สินค้าที่เกี่ยวข้อง
Energy savings effect thanks to hot air recirculation. Maximum air inlet temperature of 350 °C/ 662°F.
High performance. Detection of heating element and device overheating with alarm output.
Wide array of applications. Detection of heating element and device overheating with alarm output.
Only 67 mm wide. Remote control interface for Leister CSS or SPS temperature controller.
Smallest of the LHS Series. Remote control interface for Leister CSS or SPS temperature controller.
High performance. Detection of heating element and device overheating with alarm output.